Help | Product Care | Owner's Manuals

iFrame Stand - Assembly Instructions

Light version of wood phone stand

Each iFrame Stand is comprised of 3 parts:

  • iFrame Base
  • iFrame Floor
  • iFrame Stand "Fin"
Assembly diagram

Install the Floor

Place the iFrame Base on a clean, flat, stable surface. Insert the iFrame Floor into the iFrame Base. (The Floor may already be installed.) The Floor's top should be raised slightly above the Base's top edge. The soft felt furniture feet on the bottom of the Floor should be touching the inside of the Base. The Stand Pegs should be visible.

Insert the iFrame Stand "Fin"

If the product comes with a small accessory box, remove the Stand Fin from this protective packaging. The Stand Fin may be hidden under additional documentation.

Place the Stand Tab into the Stand Tab Slot. It will be a snug fit. Gently rock the Stand Fin lengthwise in the slot with firm pressure to firmly seat it. The Stand Tab should be fully inserted.

Do not rock the Stand Fin crosswise otherwise the solid wood may be damaged.

Precaution: if the Stand Tab is not fully inserted the Stand Fin may fall out leading to your device falling off as well. If you cannot fully insert the Stand Tab into the Stand Tab Slot, please contact us for support.

Adding your mobile device to the iFrame Stand

The iFrame Stand is only designed for small mobile devices no larger than 65mm in its longest dimension, no thicker than 15mm, and no heavier than 0.4kg. Devices larger or heavier than this may pose falling hazards or damage to the iFrame Stand.

Place the bottom of your mobile device on the iFrame Floor between the Stand Pegs and the Stand Fin, and lean the back of your mobile device against the Stand Fin. You can change the reclining angle of the mobile device by 1) removing the mobile device, 2) removing the Stand Fin, 3) reversing the direction of the Stand Fin, 4) reinserting the Stand Fin, then 5) remounting your mobile device.

You may also place books or other small objects on the iFrame Stand so long as they do not exceed 65mm on their longest dimension, no thicker than 15mm, and no heavier than 0.4kg.

Removal of the Stand Floor

First, remove any device currently on the Stand Fin or Stand Floor. Ensuring that there are no items on top of the Floor, pick up the iFrame Base and insert a finger through the circular iFrame Base holes. Avoid placing a finger in the narrow cord channel hole. Gently push the Floor up until it can be grasped.

Movement and removal of the iFrame Stand Fin

First, remove any device currently on the Stand Fin or Stand Floor.

Next, follow the instructions to remove the Stand Floor. While firmly holding the Stand Floor, gently rock the iFrame Stand Fin lengthwise in the Stand Tab Slot until it comes free. Do not use excessive force. If you cannot fully remove the Stand Fin from the Stand Tab Slot, please contact us for support.

ADDITIONAL INFORMATION